
Add to Cart
1. General Info: | |
Capacity: | 30,000 liters±3%~5% |
Compartmentation: | Single compartment |
Hauling product: | Bitumen with density 1.15 |
Overall dimension: | 10500*2500*3800 mm (Final dimension depends on the final design drawings) |
2. Tank shell | |
Material | Carbon steel Q235B |
Dished end | 6mm thick steel Q235B. Al single heads dished and flanged. |
Tank shell | 5mm thick steel Q235B |
Baffle & anti-wave plate | 4 mm thick steel Q235B |
Hydrostatic test | 150Kpa Pressure Testing-hydrostatic 150kpa each compartment |
Insulation & Cladding | Inflaming 80mm thick Rock wool around tanker shell. Tank body: Covered with stainless steel. Fastened by full circum clamp rings with rubber seal |
Heating Mode | Burner heating(Riello brand) |
Heating pipe line | 4 set 50mm diameter heating pipe coils inside the tank body, connected to burner |
Shell finish | Tank shell sandblasted to SA 2.5 and painted epoxy zinc phosphate primer(anti-corrosion), and then covered by insulation fastened by clapping Logo design as per client's requirement. |
3. Components | , |
Manhole cover | 2 sets 500mm diameter quick-open type manhole cover |
Breath valve | 2 set breath valves |
Discharge valve | 2 sets 6” outlet at rear of tank |
Thermometer | 1 set measurement range 0°℃~300℃ |
Hose and hose carrier | 1 nos (LHS) and 1 nos (RHS)hose carrier to fit 6” x 6 meter hose close type complete brackets to be installed at discharge side. |
4. Running Part | |
King Pin | 3.5 inches |
Axle | 3 axle, 13T |
Tire | 12R22.5, 12pcs+1pc spare tire |
Rim | 9.00-22.5, 13pcs |
Suspension | American Type Mechanical Suspension |
Leaf Spring | 10 layers 90mm*13mm |
Brake System | WABCO RE 6 relay-valve; T30/30+T30 air chamber, 40L air tanks |
Electric System | One unit of 24V 7-pin ISO standard socket; with brake light, turn light, reverse light, side light, reflector, fog light; one set of 6-pin standard cable. |
Accessories | • Spare wheel carrier for one spare wheels with lifting mechanism. • 2 pcs fire extinguishers, 8kg powder each, with relevant holder. • 2 pcs earth plate straps for loading-off electrostatic charges. • “Bitumen” painting on both sides of tanker . • 1 pc lockable toolbox, mounted sideways the chassis. • 2 pcs Rear reflecting panels. • Rear bumper with rear lights. • Front ladder for access to the manhole. Mudguards covering the rear wheels. |